Kia Stinger: Steering wheel / Heated Steering wheel
Description and operation
When manually selected, the heated steering wheel system improves the thermal
comfort of the driver by heating the steering wheel.
1. |
Integrated Body Control Unit (IBU)
Item
|
Specification
|
Voltage
|
13.5 V
|
Heated pad resistance
|
1.95 Ω ± 0.2Ω
|
NTC resistance
|
10.0 kΩ ± 3% (22°C ±1°C)
|
|
Schematic diagrams
Terminal Function
Housing
|
Pin
|
Function
|
Wire color
|
Pad
|
A
|
GND
|
Black
|
B
|
HEATER
|
Yellow
|
C
|
NTC+
|
Gray
|
D
|
NTC¯
|
Black
|
Repair procedures
1. |
Measure the resistance of NTC and Heated pad.
NTC resistance - 8.875 - 11.27 kΩ (25°C ±1°C)
Heated pad resistance - 1.95 ± 0.2 Ω (22°C ±1°C)
|
2. |
Measure the temperature.
– |
The temperature of wheel surface must rise from -20°C to 20°C
in 6 minutes.
|
– |
The temperature of wheel surface must reach 38°C in 25 minutes.
|
|
Components and components location
Components
1. Steering wheel body
2. Remote control switch
3. Paddle shift
4. Lower cover
5. Wiring
6. Damper
...
Description and operation
Description
EPS (Electric power steering, Column assist type) system is an engine operation
independent steering system that uses an electric motor to assist ...
Other information:
Be sure to adjust the mirror angles before driving.
Your vehicle is equipped with both left-hand and right-hand outside rearview
mirrors. The mirrors can be adjusted remotely with the remote switch. The mirror
heads can be folded back to prevent damage during an automatic vehicle wash or when
...
All tire pressures (including the spare) should be checked when the tires are
cold. “Cold Tires” means the vehicle has not been driven for at least three hours
or driven less than 1.6 km (one mile).
Recommended pressures must be maintained for the best ride, top vehicle handling,
and mini ...