Kia Stinger: Lighting / High beam operation
To turn on the high beam headlamp, push the lever away from you. The lever will
return to its original position. The high beam indicator will light when the headlight
high beams are switched on.
To prevent the battery from being discharged, do not leave the lights on for
a prolonged time while the engine is not running.
WARNING - High beams
Do not use high beam when there are other vehicles in front of your vehicle.
Using high beam could obstruct the other driver's vision.
To flash the headlights, pull the lever towards you. It will return to the normal
(low beam) position when released. The headlight switch does not need to be on to
use this flashing feature.
The light switch has a Headlight and a Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions:
(1) OFF position
(2) Auto ...
The High Beam Assist is a system that automatically adjusts the headlamp range
(switches between high beam and low beam) according to the brightness of other vehicles
and road conditions.
Opera ...
Other information:
General information
Important Safety Notice
Proper service methods and repair procedures are essential for safe, reliable
operation of all motor vehicles as well as personal safety of the operator. The
service procedures and descriptions in this shop manual provide general directio ...
Limited Slip Differential (LSD) refers to a system equipped with a mechanism
that controls the differential functions of the wheels in the Rear- Differential.
It allows for an enhancement in handling performance during turning.
Never run wheels with one of them lifted by the jack. It is extreme ...