Kia Stinger: Lighting System / High Mounted Stop Lamp

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Lighting System / High Mounted Stop Lamp

Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the tailgate upper trim. (Refer to Body - "Tailgate Trim")

3.	Disconnect the high mounted stop lamp connector (A).

4.	Remove the high mounted stop lamp (A) after loosening the mounting bolts.

Installation

1.	Install the high mounted stop lamp.

2.	Connect the high mounted stop lamp connector.

3.	Install the tailgate upper trim.

4.	Connect the negative (-) battery terminal.

License Lamps

Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate back panel. (Refer to Body - "Tailgate Bac ...

Rear Combination Lamp

Repair procedures Removal Rear Combination Lamp (Outside) 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: TPMS Receiver

Description and operation Operation 1. General Function • Auto-learn takes place only once per Ignition cycle. • On successful completion, 4 road wheel sensor ID's are latched into memory ...

Kia Stinger CK 2018-2024 Owners Manual: The Eco-coasting system

When certain conditions are met, the engine is automatically decoupled from the transmission while the shift lever is remained in D (Drive). In this ECO Coasting mode, the engine stays at idling speed to reduce fuel consumption and increase coasting distance. The engine is automatically couple ...