Kia Stinger: Light bulb position (Side) / High mounted stop lamp (LED type) bulb replacement

If the high mounted stop lamp (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an integrated unit. The LED lamps have to be replaced with the unit.
A skilled technician should check or repair the high mounted stop lamp (LED),
for it may damage related parts of the vehicle.
1. Open the liftgate.
2. Remove the service cover of both side (drive side and passenger side).
3. Remove the nuts from rear combination lamp of both side (drive side and passenger
side).
4 ...
If the license plate lamp (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an in ...
Other information:
❈ Left side : Normal , Right side : Blown
A vehicle’s electrical system is protected from electrical overload damage by
fuses.
This vehicle has 4 (or 5) fuse panels, one located in the driver’s side panel
bolster, the other in the engine compartment near the battery.
If any of your ve ...
Resetting the system
The last break time is set to 00:00 and the driver's attention level is
set to 5 (very attentive) when the driver resets the Driver Attention Warning
system.
The driver attention warning system resets in the following situations.
- The engine is turned OFF.
- T ...