Kia Stinger: Brake system / Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when it starts to go after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling back by applying the brakes automatically for about 2 seconds. The brakes are released when the accelerator pedal is depressed or after about 2 seconds.
The HAC is activated only for about 2 seconds, so when the vehicle is starting off always depress the accelerator pedal.
WARNING - Maintaining Brake Pressure on Incline
HAC does not replace the need to apply brakes while stopped on an incline. While stopped, make sure you maintain brake pressure sufficient to prevent your vehicle from rolling backward and causing an accident. Don’t release the brake pedal until you are ready to accelerate forward.
Vehicle stability management (VSM)
This system provides further enhancements to vehicle stability and steering responses
when a vehicle is driving on a slippery road or a vehicle detects changes in coefficient
of friction between r ...
Good braking practices
Check to be sure the parking brake is not engaged and the parking brake
indicator light is out before driving away.
Driving through water may get the brakes wet. They can also get wet when
...
Other information:
Kia Stinger CK 2018-2024 Service Manual: AVN Head Unit
Components and components location Components Connector Pin Information No. Connector A Connector B Connector C Connector D Internal Amplifier External Amplifier 1 ...
Kia Stinger CK 2018-2024 Owners Manual: Audio system
✽ NOTICE If you install an after market HID head lamp, your vehicle’s audio and electronic device may malfunction. ❈ If your vehicle is equipped with AVN(Audio, Video and Navigation) system, refer to a separately supplied manual for detailed information. Antenna Shark fin antenna Th ...
