Kia Stinger: Front Seat Belt / Hood
Repair procedures
| Adjustment |
| 1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down, or right and left. |
| 2. |
Adjust the hood height by turning the hood overslam bumpers (C). |
| 3. |
After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down, or right and left.
|
- Hood Assembly
- Hood Seal Weatherstrip
- Hood Lifter
- Hood Weatherstrip
- Hood Insulator Pad
- Hood Latch Release Handle
- Hood Latch
Fuel Filler Door
Components and components location
Component Location
1. Fuel filler door
Repair procedures
Replacement
...
Hood Assembly
Components and components location
Component Location
1. Hood assembly
Repair procedures
Replacement
&n ...
Other information:
Kia Stinger CK 2018-2025 Service Manual: Rear Wheel Speed Sensor
Repair procedures Removal [NON ECS] 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque : 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...
Kia Stinger CK 2018-2025 Service Manual: Tail Gate Trim
Components and components location Component Location 1. Tailgate trim 2. Tailgate side trim [LH] 3. Tailgate upper trim 4. Tailgate side trim [RH] Repair procedures Replacement ...
Copyright © www.kstinger.com 2015-2025
