Kia Stinger: Hood / Hood Assembly
Components and components location
Repair procedures
|
Be careful not to damage the hood and body.
|
|
When removing and installing the hood, work in a group of two or more.
|
| 1. |
After loosening the hood hinge (A) mounting bolts, remove the hood assembly
(B).
|
Tightening torque :
21.6 - 26.5 N·m (2.2 - 2.7 Kgf·m, 15.9 - 19.5 lb·ft)
|
|
| 2. |
Install in the reverse order of removal.
| •
|
Make sure that the hood locks/unlocks and opens/closes
properly.
|
| •
|
Adjust the hood alignment.
|
|
|
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving
it up and down, or right and left.
2.
...
Repair procedures
Replacement
1.
Detach the clip and then remove the hood seal weatherstrip (A).
...
Other information:
Repair procedures
Inspection
Troubleshooting of the speakers
When handling the speakers :
•
Do not cause shock to the speakers by dropping or throwing them.
...
With the door lock button
To unlock a door, push the door lock button (1) to the “Unlock” position.
The red mark on the handle will be visible.
To lock a door, push the door lock button (1) to the “Lock” position. If
the door is locked properly, the red mark on the handle will ...
Hood
Hood Seal Weatherstrip