Kia Stinger: Hood / Hood Latch

Kia Stinger CK 2018-2024 Service Manual / Front Seat Belt / Hood / Hood Latch

Components and components location

Component Location

1. Hood latch assembly

Repair procedures

Replacement

1.	Remove the front bumper. (Refer to Front bumper - "Front bumper Assembly")

2.	Remove the hood latch assembly (A) after loosening the mounting screw.

3.	Disconnect the hood latch cable (A).

4.	Disconnect the hood latch connector (A) after loosening the mounting screw.

Install in the reverse order of removal.

•	Make sure that the hood latch release cable is connected properly.

•	Make sure that the hood locks/unlocks and opens/closes properly.

•	Adjust the latch alignment.

Hood Latch Release Handle

Components and components location Component Location 1. Hood latch release handle Repair procedures Replacement 1. Afte ...

Interior Trim

Components and components location Components 1. Front pillar trim 2. Center pillar upper trim 3. Rear pillar trim 4. Cowl side trim 5. Front door scuff trim ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Power Door Lock Switch

Repair procedures Inspection Diagnosis With KDS 1. The body electrical system can be quickly diagnosed for failed parts by using vehicle diagnostic system (KDS). The diagnostic system (KDS) provides the following information. (1) Self diag ...

Kia Stinger CK 2018-2024 Owners Manual: LCD Modes

(1) SPORT mode (if equipped) This mode displays Gauge, Lap Timer, G-Force. (2) Trip Computer mode This mode displays driving information such as the tripmeter, fuel economy, and so on. ❈ For more details, refer to “Trip Computer” in this chapter. (3) Turn by Turn mode (if equipped) T ...