Kia Stinger: Hood / Hood Latch Release Handle
Components and components location
1. Hood latch release handle
|
|
Repair procedures
1. |
After loosening the mounting screw, remove the hood latch release handle
(A).
|
2. |
Install in the reverse order of removal.
•
|
Make sure that the hood latch cable is connected properly.
|
•
|
Make sure that the hood locks/unlocks and opens/closes
properly.
|
|
|
Repair procedures
Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
  ...
Components and components location
Component Location
1. Hood latch assembly
Repair procedures
Replacement
1.
Remove the fro ...
Other information:
Service data
Service data
Item
Specification
Master cylinder
Type
Tandem
Cylinder I.D.
Ø 23.81 mm (0.937 in)
Piston stroke
36±1 mm (1.41 ± 0.039 in)
...
Description and operation
Description
•
Engine coolant is used for circulating heat in order to heat and cool
the transmission oil.
•
Rapidly elevates the transmission oil temperature during the initial
cold start of the engine.
...