Kia Stinger: ISG (Idle Stop & Go) System / Hood switch

Kia Stinger CK 2018-2024 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Hood switch

Description and operation
Description

Hood switch is one of the factors influencing the activation of the ISG function. When the hood is open, the engine will not start or stop by the ISG function for safety reasons.

Repair procedures
Replacement

Hood Switch Inspection

1.

Remove the front bumper assembly.

(Refer to Body - "Front Bumper Assembly")

2.

Disconnect the hood switch connector (A).

3.

Check for continuity between the terminals and ground as shown below.

(Refer to Body - "Hood Latch")

Seat belt switch
Description and operation Description Via the seat belt/door switch, the ISG function can detect if the driver side seat belt is fastened and the driver side door is closed. If the dri ...

Fuel Delivery System
Components and components location Components Location Fuel Tank & Filler-Neck Assembly 1. Fuel Tank 2. Low Pressure Fuel Pump 3. Sub Fuel Sender ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Front Door Window Glass


Components and components location Component Location 1. Front door window glass Repair procedures Replacement    Put on gloves to protect your hands. ...

Kia Stinger CK 2018-2024 Service Manual: AVN Front Monitor


Components and components location Components Repair procedures Removal    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools t ...

Copyright © www.kstinger.com 2015-2024