Kia Stinger: ISG (Idle Stop & Go) System / ISG OFF switch
Description and operation
The ISG OFF switch on the floor console can be used to deactivate the ISG function.
Repair procedures
|
Put on gloves to protect your hands.
|
| • |
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape around
the related parts, to prevent damage.
|
| • |
Use a plastic panel removal tool to remove interior trim pieces
to protect from marring the surface.
|
| • |
Take care not to bend or scratch the trim and panels.
|
|
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remvoe the console upper complete (A) by using a remover.
|
| 3. |
Disconnect the connectors (A) from the console upper complete.
|
| 4. |
Remove the connector (A) from the console floor switch complete.
|
| 5. |
Remove the console floor switch complete (A) after loosening the mounting
screws.
|
| 1. |
Install the console floor switch complete.
|
| 2. |
Install the connector from the console floor switch complete.
|
| 3. |
Connect the connectors from the console upper complete.
|
| 4. |
Install the console upper complete.
|
| 5. |
Connect the negative (-) battery terminal.
|
| • |
Make sure that the connectors are plugged in properly.
|
| • |
Check the AVM system for normal operation.
|
|
Components and components location
Components Location
Schematic diagrams
Circuit Diagram
[200W]
[400W]
Terminal Function
...
Specifications
Specification
▷ 13.5V, 150A
Item
Specification
Rated voltage
13.5V , 150A
Speed in use
...
Other information:
Components and components location
Components
1. Side repeater lamp
2. BCW Indicator
3. AVM Camera
4. Puddle lamp
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
...
Specifications
Specifications
Item
Specification
Control type
N/L (Normal Low)
Control pressure kpa (kgf/cm², psi)
0 - 1,569.06 (0 - 16, 0 - 227.57)
Current (mA)
0 ...
DC/DC Converter
Alternator