Kia Stinger: Lane Keeping Assist (LKA) / Lane Keeping Assist (LKA) Unit
Components and components location
| Components |
Repair procedures
| Removal |
When replacing the LKA switch, check that the symbol mark in the cluster operates normally by pressing the ON/OFF switch.
|
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Using a screwdriver or remover, remove the mirror wiring cover (A).
|
| 3. |
Disconnect the LKA unit connector (A).
|
| 4. |
Remove the LKA unit (B) by pulling out lock pins (A).
|
| Installation |
When you need calibration
| – |
Replace LKA with a new one |
| – |
LKA is removed and mounted |
| – |
Windshield glass changed |
| – |
LKA coupler of the windshield glass is deformed |
| 1. |
Align the reference point at alignment point(A) and align LKA .
|
| 2. |
Apply force to lock position (B) to complete mounting.
|
| 3. |
Connect the LKA unit connector. |
| 4. |
Install the mirror wiring cover. |
| 5. |
Connect the negative(-) battery terminal. |
Lane Keeping Assist (LKA)
Components and components location
Components
1. LKA ON/OFF switch
2. Instrument cluster
3. LKA Unit (MFC)
* MFC : Multi Function Camera
†...
Wireless Power Charger (WPC) System
Specification
Specifications
Item
Specification
Rated voltage
DC 12 V
Operating voltage
DC 9.0 - 16.0 ...
Other information:
Kia Stinger CK 2018-2024 Owners Manual: Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many kilometers (miles) you can get from a liter (gallon) of fuel.To operate your vehicle as economically as possible, use the following driving suggestion ...
Kia Stinger CK 2018-2024 Service Manual: Parking Brake Assembly
Repair procedures Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the knee airbag. ...
