Kia Stinger: Lane Keeping Assist (LKA) system / LKA system Function Change
The driver can change LKA to Lane Departure Warning System (LDW system) or change the LKA system mode between Standard LKA and Active LKA from the User Settings Mode on the LCD display.
The driver can choose them by placing the ignition switch to the ON position and by selecting ‘User Settings’, ‘Driver Assistance’, and ‘Lane Keeping Assist’.
The system is automatically set to Standard LKA.
Lane Departure
LDW alerts the driver with a visual and acoustic warning when the system detects the vehicle leaving the lane. In this mode, the system will not provide steering inputs. When the vehicle’s front wheel contacts the inside edge of lane line, LKA system issues the lane departure warning.
Standard LKA
The Standard LKA mode guides the driver to keep the vehicle within the lanes. It provides inputs to the steering when the vehicle is about to deviate from the lanes.
Active LKA
The active inputs to the LKA mode provides more frequent steering in comparison with the Standard LKA mode.
LKA system malfunction
If there is a problem with the system a message will appear. If the problem continues
the LKA system fail indicator will illuminate.
LKA system fail indicator
The LKA system fail indicator (yell ...
Blind-spot Collision Warning (BCW)
The Blind-Spot Collision Warning (BCW) system uses radar sensors in the rear
bumper to monitor and warn the driver of an approaching vehicle in the driver's
blind spot area.
The system monitors ...
Other information:
Kia Stinger CK 2018-2024 Service Manual: Starting System
Description and operation Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and the battery cable. When the ignition key is turned to the start ...
Kia Stinger CK 2018-2024 Service Manual: Vanity Lamp
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the vanity lamp (A) using a flat-tip screwdriver. 3. Disconnect the vanity lamp connector (A). Insta ...
