Kia Stinger: AVN System / Multimedia Jack

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / AVN System / Multimedia Jack

Schematic diagrams
Circuit Diagram

Description and operation
Description

The multimedia jack on the console upper cover is for customers who like to listen to external portable music players like the MP3 etc., through the vehicle's sound system when it is linked to this jack. The customer has this added option.

In case of distorted sound coming from the AUX-linked external music players, the audio unit may not be defective but the output level of the player does not match the specification of the AUX.

Repair procedures
Removal

Multimedia Jack

  

Put on gloves to protect your hands.

  

When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Disconnect the negative (-) battery terminal.

2.

Remove the console complete assembly.

(Refer to Body - "Floor Console Assembly")

3.

Remove the front cover (A) after loosening the mounting screws.

4.

Remove the floor console tray (A).

5.

Disconnect the multimedia jack connectors (A).

6.

Remove the multimedia jack (A) after releasing the fixed hooks.

USB Charger

1.

Disconnect the negative (-) battery terminal.

2.

Remove the rear console cover.

(Refer to Body - "Rear Console Cover")

3.

Disconnect the USB charger connector (A).

4.

Disconnect the rear heater & A/C control unit connector (A).

5.

Remove the USB charger (A) after loosening the mounting screws.

Installation

Multimedia Jack

1.

Install the multimedia jack.

2.

Connect the multimedia jack connector.

3.

Install the floor console tray.

4.

Install the front cover.

5.

Install the console complete assembly.

6.

Connect the negative (-) battery terminal.

USB Charger

1.

Install the USB charger.

2.

Connect the rear heater & A/C control unit connector.

3.

Connect the USB charger connector.

4.

Install the rear console cover.

5.

Connect the negative (-) battery terminal.

AVN Remote Controller
Components and components location Components 1. Left Remote Control Switch (Audio + Bluetooth + Voice) 2. Right Remote Control Switch (Trip Computer + ...

Mic
Repair procedures Inspection 1. Disconnector the negative (-) battery terminal. 2. Remove the overhead console lamp. (Refer to Lighting System - ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Hydraulic System


Oil pressure characteristics input Oil-pressure characteristics input Solenoid valve oil-pressure characteristics input procedure 1. Perform the oil-pressure characteristics input procedure using the KDS. 2. Click ...

Kia Stinger CK 2018-2024 Service Manual: Wheel


Repair procedures Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)    When using an impact gun, ...

Copyright © www.kstinger.com 2015-2024