Kia Stinger: Hydraulic System / Oil Pump Unit (OPU)

Kia Stinger CK 2018-2024 Service Manual / Automatic Transmission System / Hydraulic System / Oil Pump Unit (OPU)

Components and components location
Components Location

1. Oil Pump Unit (OPU)
2. OPU bracket

Schematic diagrams
Circuit Diagram

Repair procedures
Removal
1.

Remove the integrated body control unit (IBU).

(Refer to - Body Electrical System - "Integrated Body Control Unit")

2.

Disconnect the OPU connector (A) and then remove the OPU by loosening the OPU bracket nut (B).

Tightening torque :

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

3.

Remove the OPU (A) from the bracket.

Tightening torque :

9.8 - 11.8 N·m (1.0 - 1.2 kgf·m, 7.2 - 8.7 lb·ft)

Installation
1.

Install in the reverse order of removal.

Oil Filter
Components and components location Components 1. Automatic transmisson 2. Valve body cover 3. Oil filter 4. ATF level check pipe 5. Drain plug ...

Electronic Oil Pump (EOP)
Components and components location Components Location 1. Electric Oil Pump (EOP) Schematic diagrams Circuit Diagram Repair procedu ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Rear Door Belt Outside Weatherstrip


Repair procedures Replacement 1. Pull down rear door window glass by pressing the power window glass switch. 2. Remove the rear door belt outside weatherstrip (A). 3. Install in the reverse order of removal. ...

Kia Stinger CK 2018-2024 Owners Manual: Detecting area


The Smart Liftgate operates with a welcome alert if the smart key is detected within 50 ~ 100 cm (20 ~ 40 inches) from the liftgate. The alert stops at once if the smart key is positioned outside the detecting area during the Detect and Alert stage. ✽ NOTICE The Smart Liftgate ...

Copyright © www.kstinger.com 2015-2024