Kia Stinger: Light bulb position (Side) / Position lamp + DRL (LED type) bulb replacement (Headlamp Type A)
■ Head lamp - Type A
If the position lamp + DRL (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an integrated unit. The LED lamps have to be replaced with the unit.
A skilled technician should check or repair the position lamp + DRL (LED), for
it may damage related parts of the vehicle.
■ Head lamp - Type A
If the side marker (1) does not operate, have the vehicle checked by an authorized
Kia dealer.
A skilled technician should check or repair the side marker, for it may dama ...
■ Head lamp - Type A
1. Remove the service cover clip on the wheel housing.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connecto ...
Other information:
Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels aligned again. However,
if you notice unusual tire wear or your ve ...
Repair procedures
Replacement
Do not apply sealant to the body.
1.
Using a screwdriver, remove the tailgate lifter (B) after removing the
socket clips (A).
2.
...