Kia Stinger: Power Door Mirrors / Power Door Mirror Actuator

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Power Door Mirrors / Power Door Mirror Actuator

Components and components location
Components

1. Side repeater lamp
2. BCW Indicator
3. AVM Camera
4. Puddle lamp

Repair procedures
Inspection
1.

Disconnect the negative (-) battery terminal.

2.

Remove the outside mirror assembly.

3.

Disconnect the power door mirror connector (A) from the harness.

4.

Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.

[Mirror Control (LH/RT)]

[BCW Indicator]

[Mirror Heater]

[Side Repeater Lamp]

[Puddle Lamp]

[Folding Mirror]

Diagnosis With KDS

1.

In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS).

1)

Self diagnosis : Checking failure and code number (DTC)

2)

Current data : Checking the system input/output data state

3)

Actuation test : Checking the system operation condition

4)

Additional function : Controlling other features including system option setting and zero point adjustment

2.

Select the 'Car model' and the system to be checked in order to check the vehicle with the tester.

3.

Select the 'Driver seat or Assistant seat door module (DDM/ADM)' to check the driver seat or assistant door module (DDM/ADM).

4.

Select the "Current Data" menu to search the current state of the input/output data.

The input/output data for the sensors corresponding to the driver seat or assistant door module(DDM/ADM) can be checked.

5.

If you will check the power door lock operation forcefully, select "Actuation test".

Removal
1.

After inserting the flat-bladed screwdriver or remover as shown in the illustration below, remove the mirror (A) by applying a momentary force.

  

Wrap the tool with protective tape or cloth to prevent damage to the parts.

Do not insert the tool too deeply.

2.

Disconnect the heater connectors (A) and rear corner radar indicator connector (B).

3.

Remove the mirror actuator (A) by using flat-bladed screwdriver or remover after loosening the screw.

4.

Disconnect the mirror actuator connector (A).

Installation
1.

Install in the reverse order of removal.

Power Door Mirror Switch
Components and components location Components Schematic diagrams Circuit Diagram Front Safety + IMS Type Front Safety + Non-IMS Type Repair procedures ...

Power Tailgate System
Components and components location Components 1. Anti pinch strip (2EA) 2. Power tailgate spindle (2EA) 3. Power tailgate buzzer 4. Side crash pad switch 5. ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: A/C Pressure Transducer


Description and operation Description A/C pressure transducer measures the pressure in high pressure line and converts it into voltage. Based on the converted voltage, engine ECU controls cooling fan by operating it at high or low speed. Engine ECU stops the operation of compressor ...

Kia Stinger CK 2018-2024 Owners Manual: Lane Keeping Assist (LKA) system


The Lane Keeping Assist (LKA) system is designed to detect the lane markers on the road with a front view camera at the front windshield, and assists the driver's steering to help keep the vehicle in the lanes. When the system detects the vehicle straying from its lane, it alerts the driver ...

Copyright © www.kstinger.com 2015-2024