Kia Stinger: Front Bumper / Radiator Grille

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grille

Components and components location

Component Location

1. Radiator grille

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front bumper assembly. (Refer to Front Bumper - "Front Bumper Assembly")

2.	Remove the mounting clip (A) and then remove the front bumper energy absorber (B).

3.	Remove the front bumper wiring (A).

4.	Remove the pantoscopic camera (A).

5.	Remove the radiator upper cover (A) after loosening the screws.

6.	Remove the radiator grille (A) after loosening the screws.

Install in the reverse order of removal.

Replace any damage clips.

Front Bumper Assembly

Components and components location Component Location 1. Front bumper cover Repair procedures Replacement &nb ...

Front Door

Components and components location Components 1. Front door trim panel 2. Front door module 3. Front door panel 4. Front door channel 5. Front door side wea ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Power Window Switch

Components and components location Components Driver Power Window Switch Assist Power Window Switch Rear Power Window Switch Schematic diagrams Circuit Diagram Driver Power Window Switch [Front Safety + IMS Type] [Front Safety ...

Kia Stinger CK 2018-2024 Owners Manual: Electric power steering (EPS)

The power steering uses a motor to assist you in steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it will require increased steering effort. The EPS is controlled by a power steering control unit which senses t ...