Kia Stinger: Lighting System / Rear Combination Lamp
Repair procedures
| Removal |
Rear Combination Lamp (Outside)
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Using a screwdriver or remover, remove the rear combination lamp cover (A).
|
| 3. |
Remove the rear combination lamp (A) after loosening the mounting screw and nut.
|
| 4. |
Disconnect the rear combination lamp connector (A).
|
| Bulb Replacement |
Turn signal lamp
| 1. |
Turn the headlamp switch off. |
| 2. |
Remove the rear combination lamp (outside). |
| 3. |
Remove the turn signal lamp bulb (B) by turning the socket (A) counterclockwise.
|
Rear Combination Lamp (Inside)
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Using a screwdriver or remover, remove the rear combination lamp cover (A).
|
| 3. |
Disconnect the connector (B) and then remove the rear combination lamp (A) after loosening the nuts.
|
| Bulb Replacement |
Back up lamp
| 1. |
Remove the rear combination lamp. (Inside) |
| 2. |
Remove the back up lamp bulb (B) by turning the socket (A) counterclockwise.
|
| Installation |
Rear Combination Lamp (Outside)
| 1. |
Connect the rear combination lamp connector. |
| 2. |
Install the rear combination lamp. |
| 3. |
Install the rear combination lamp cover. |
| 4. |
Connect the negative (-) battery terminal. |
Rear Combination Lamp (Inside)
| 1. |
Install the rear combination lamp. |
| 2. |
Connect the rear combination lamp connector. |
| 3. |
Install the rear combination lamp cover. |
| 4. |
Connect the negative (-) battery terminal. |
High Mounted Stop Lamp
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the tailgate upper trim.
(Refer to Body - "Tailgate Tri ...
Multifunction Switch
Specifications
Specifications
Items
Specifications
Rated voltage
DC 12 V
Operating temperature range
...
Other information:
Kia Stinger CK 2018-2024 Owners Manual: Selecting a Child Restraint System (CRS)
When selecting a CRS for your child, always: Make sure the CRS has a label certifying that it meets applicable Safety Standards of your country. Select a child restraint based on your child’s height and weight. The required label or the instructions for use typically provide this infor ...
Kia Stinger CK 2018-2024 Owners Manual: Vehicle to vehicle distance setting (Smart cruise control system)
To set vehicle to vehicle distance This function allows you to program the vehicle to maintain relative distance to the vehicle ahead without depressing the accelerator pedal or brake pedal. The vehicle to vehicle distance will automatically activate when the smart cruise control system is o ...
