Kia Stinger: Floor Console / Rear Console Cover

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Floor Console / Rear Console Cover

Components and components location

Component Location

1. Rear console cover

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the console assembly. (Refer to Floor console - "Floor Console Assembly")

2.	Remove the rear console bracket (A) after loosening the console lower side mounting screws.

3.	Remove the console storage box & armrest(A) after loosening the mounting screws.

4.	Disconnect the console lower side extension wiring mounting clip (A).

5.	Remove the console rear cover (A) after loosening the mounting screws.

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Console Armrest

Components and components location Component Location 1. Front console armrest Repair procedures Replacement ...

Front Bumper

Components and components location Components 1. Front bumper cover assembly 2. Front bumper mounting bracket 3. Front bumper side bracket ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Interior care

Interior general precautions Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discoloration. If they do contact the interior parts, wipe them off immediately. If necessary, use a vin ...

Kia Stinger CK 2018-2024 Service Manual: Windshield Wiper/Washer

Components and components location Component Location 1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose & nozzle 4. Wiper motor & linkage assembly 5. Washer motor 6. Washer fluid level sensor 7 ...