Kia Stinger: Rear Door / Rear Door Side Weatherstrip
Repair procedures
1. |
Loosen the rear door checker (B) mounting bolt.
|
2. |
Detach the clips, then remove the rear door side weatherstrip (A).
Tightening torque :
16.7 - 21.6 N·m (1.7 - 2.2 Kgf·m, 12.3 - 15.9 lb·ft)
|
|
3. |
Install in the reverse order of removal.
Replace any damaged clips.
|
|
Repair procedures
Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt insid ...
Components and components location
Component Location
1. Rear door latch
Repair procedures
Replacement
& ...
Other information:
Components and components location
Component Location
1. Front Seat Inner Shield Cover
Repair procedures
Replacement
Put on gloves to protect your hands.
...
Components and components location
Components Location
1. ECM (Engine Control Module)
2. Manifold Absolute Pressure Sensor (MAPS)
3. Intake Air Temperature Sensor (IATS)
4. Boost Pressure Sensor (BPS)
5. Engine Coolant Temperature Sensor (ECTS)
...