Kia Stinger: Rear Suspension System / Rear Lower Arm
Repair procedures
1. |
Remove wheel nuts, wheel and tire (A) from hub.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
|
Be careful not to damage the wheel bolts when removing the wheel
and tire (A).
|
|
2. |
Remove the rear lower arm cover (A).
|
3. |
Loosen the rear lower arm bolt & nut and then separate the lower arm
from the rear axle.
Tightening torque :
156.9 - 176.5 N·m (16.0 - 18.0 kgf·m, 115.7 - 130.2 lb·ft)
|
Up the transmission jack under the lower arm in order to remove
the rear lower arm in no-load condition.
|
|
4. |
Loosen the bolt & nut and then remove the rear lower arm.
Tightening torque:
137.3 - 156.9 N·m (14.0 - 16.0 kgf·m, 101.3 - 115.7 lb·ft)
|
|
5. |
Install in the reverse order of removal.
Install at the empty vehicle height when it is assembled.
|
|
6. |
Check the alignment.
(Refer to Suspension System - "Alignment")
|
1. |
Check the bushing for wear and deterioration.
|
2. |
Check the rear lower arm for deformation.
|
3. |
Check the coil spring and spring pad for deterioration and deformation.
|
4. |
Check for all bolts and nuts.
|
Repair procedures
Removal
1.
Remove wheel nuts, wheel and tire (A) from hub.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94. ...
Repair procedures
Removal
1.
Remove wheel nuts, wheel and tire (A) from hub.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 9 ...
Other information:
If you have a flat tire, the Low Tire Pressure telltale will come on. Have the
flat tire repaired by an authorized Kia dealer as soon as possible or replace the
flat tire with the spare tire.
CAUTION - Repair Agents
Never use a puncture-repairing agent not approved by Kia to repair and/or
in ...
When selecting a CRS for your child, always:
Make sure the CRS has a label certifying that it meets applicable Safety
Standards of your country.
Select a child restraint based on your child’s height and weight. The required
label or the instructions for use typically provide this infor ...