Kia Stinger: Cylinder Block / Rear Oil Seal

Kia Stinger CK 2018-2024 Service Manual / Engine Mechanical System / Cylinder Block / Rear Oil Seal

Repair procedures

Replacement

1.	Remove the automatic transmission. (Refer to Automatic Transmission System - "Automatic Transmission")

2.	Remove the drive plate. (Refer to Cylinder Block - "Drive Plate")

3.	Remove the rear oil seal (A).

Install new rear oil seal.

(1)	Apply engine oil to a new oil seal lip.

(2)

Using SST (09214 - 2W200, 09214-3K100) (B) and a hammer, tap in the oil seal (A) until its surface is flush with the rear oil seal retainer edge.

Always use a new rear oil seal.

5.	Install the other parts in the reverse order of removal.

Drive Plate

Repair procedures Removal and Installation 1. Remove the automatic transmission. (Refer to Automatic Transmission System - "Automatic Transmission") ...

Piston and Connecting Rod

Repair procedures Disassembly In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Light bulb position (Rear)

■ Rear combination lamp - Type A ■ Rear combination lamp - Type B ■ High mounted stop lamp ■ License plate lamp (1) Stop and tail lamp (LED type) (2) Stop lamp (LED type) (3) Back-up lamp (bulb type) (4) Rear turn signal lamp (bulb type) (5) Side marker (LED type) (6) Rear t ...

Kia Stinger CK 2018-2024 Owners Manual: Cup holder

WARNING - Hot liquids Do not place uncovered cups with hot liquid in the cup holder while the vehicle is in motion. If the hot liquid spills, you may burn yourself. Such a burn to the driver could lead to loss of control of the vehicle. CAUTION Keep your drinks sealed while driving to prevent ...