Kia Stinger: Rear Seat Belt / Rear Seat Belt Retractor

Kia Stinger CK 2018-2024 Service Manual / Front Seat Belt / Rear Seat Belt / Rear Seat Belt Retractor

Components and components location
Component Location

1. Rear seat belt retractor [LH]
2. Rear seat belt retractor [RH]

Repair procedures
Replacement
  

When installing the belt, be careful not to damage the retractor.

1.

Remove the rear pillar trim.

(Refer to Interior Trim - "Rear Pillar Trim")

2.

Disconnect the rear seat belt retractor connector (A).

[LH]

[RH]

3.

Remove the rear seat belt retractor (A) after loosening the mounting bolts.

Tightening torque :

39.2 - 53.9 N·m (4.0 - 5.5 Kgf·m, 28.8 - 39.8 lb·ft)

[LH]

[RH]

4.

Install in the reverse order of removal.

  

Replace any damaged clips.

Make sure that the connector is connected preperly.

Rear Seat Belt
...

Rear Center Seat Belt Retractor
Components and components location Component Location 1. Rear center seat belt retractor Repair procedures Replacement ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Using All Wheel Drive (AWD)


The All Wheel Drive (AWD) System delivers engine power to front and rear wheels for maximum traction. AWD is useful when extra traction is required, such as when driving slippery, muddy, wet, or snow-covered roads. If the system determines there is a need for four wheel drive, the engine's driv ...

Kia Stinger CK 2018-2024 Owners Manual: Electronic stability control (ESC)


The Electronic Stability control (ESC) system is designed to stabilize the vehicle during cornering maneuvers. ESC checks where you are steering and where the vehicle is actually going. ESC applies the brakes on individual wheels and intervenes with the engine management system to stabilize ...

Copyright © www.kstinger.com 2015-2024