Kia Stinger: Fuses And Relays / Relay Box (Engine Compartment)

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Fuses And Relays / Relay Box (Engine Compartment)

Components and components location

Component Location

E/R Junction Block (LHD - 1/2)

Circuit (E/R Junction Block (LHD - 2/2)

E/R Junction Block (RHD - 1/2)

Circuit (E/R Junction Block (RHD - 2/2))

PCB Block

Circuit (PCB Block)

Diesel Junction Block (D4HB : R 2.2L TCI)

Battery Junction Block

Repair procedures

Inspection

1.	Disconnect the negative (-) battery terminal.

2.	Pull out the relay from the engine compartment relay block.

Power Relay (Type A)

Check for continuity between the terminals.

1.	After supplying power to between No. 85 and 86 power relay terminals, check that there is continuity between No. 30 and 87 terminals.

2.	After disconnecting power between No. 85 and 86 power relay terminals, check that there is no continuity between No. 30 and 87 terminals. Engine Room Relay Block

Power Relay (Type B)

Check for continuity between the terminals.

1.	After supplying power to between No. 85 and 86 power relay terminals, check that there is continuity between No. 30 and 87 terminals.

2.	After disconnecting power between No. 85 and 86 power relay terminals, check that there is no continuity between No. 30 and 87 terminals.

Metal Core PCB Block

1.	Disconnect the negative (-) battery terminal.

2.	Push the four hooks in the direction of the arrow and lift up the metal core PCB block (A).

3.	Remove the metal core PCB block by disconnecting the connectors.

Fuse

1.	Check that the fuse holders are loosely held and that the fuses are securely fixed by the holders.

2.	Check that each fuse circuit has the exact fuse capacity.

Check the fuses for any damage.

•	If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always identify the cause of the blown fuse and completely eliminate the problem before installing a new fuse.

Multi Fuse

1.	Disconnect the negative (-) battery terminal.

2.	Remove the multi fuse (A) after loosening the mounting nut.

Install in the reverse order of removal.

•	The entire multi fuse (A) has to be replaced even if only one fuse is damaged.

•	When replacing it, refer to “the Engine compartment- component location” diagram to check fuse capacities and circuit arrangement.

•	Use the multi fuse of the exact fuse capacity for each circuit.

Fuses And Relays

Components and components location Component Location [Engine Room] 1. Engine room junction block [Interior Fuse & Relay] ...

Relay Box (Passenger Compartment)

Components and components location Component Location Integrated central control unit (ICU) Circuit (ICU Junction Block) Rear Sub Junction Block ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Rheostat

Components and components location Components Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") ...

Kia Stinger CK 2018-2024 Service Manual: Tail Gate

Repair procedures Adjustment 1. After loosening the tailgate hinge (A) mounting bolts, adjust the tailgate by moving it up and down, or right and left. 2. Adjust the tailgate height by turning the tailgate overslam bumpers (B). ...