Kia Stinger: Towing / Removable towing hook
1. Open the liftgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the right side part or lower part of the cover
on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is
fully secured.
4. Remove the towing hook and install the cover after use.
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent damage ...
■ Front
■ Rear
If towing is necessary, have it done by an authorized Kia dealer or a commercial
tow truck service.
If towing service is not available in an emergency, your vehicle may be ...
Other information:
Specifications
Specifications
Item
Specification
Control type
ON/OFF
Control pressure kpa (kgf/cm², psi)
539.36
(5.5, 78.23)
Current (mA)
0 - 600
Co ...
Components and components location
Components
1. Side repeater lamp
2. BCW Indicator
3. AVM Camera
4. Puddle lamp
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
...