Kia Stinger: ISG (Idle Stop & Go) System / Seat belt switch
Description and operation
Via the seat belt/door switch, the ISG function can detect if the driver side
seat belt is fastened and the driver side door is closed. If the driver side seat
belt/door are not fastened/closed, the ISG system will not operate. If the seat
belt/door are unfastened/opened, the engine will not start or stop by the ISG function
for safety reasons.
Repair procedures
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Remove the front seat belt buckle (A) after loosening the mounting bolt.
Tightening torque :
39.2 - 53.9 N·m (4.0 - 5.5 Kgf·m, 28.9 - 39.8 lb·ft)
|
|
1. |
Install in the reverse order of removal.
|
Description and operation
Description
Via the seat belt/door switch, the ISG function can detect if the driver side
seat belt is fastened and the driver side door is closed. If the dri ...
Description and operation
Description
Hood switch is one of the factors influencing the activation of the ISG function.
When the hood is open, the engine will not start or stop by the ...
Other information:
Components and components location
Components
[Mobis]
Connector Pin Information
No.
Connector A
Connector B
1
Battery (+)
Rear door left speaker (+)
2
Battery ...
If the driver turns off the engine when the sunroof is not fully closed, the
warning chime will sound for a few seconds and the above warning illustration will
appear on the LCD display.
Close the sunroof securely when leaving your vehicle.
CAUTION
Make sure the sunroof is fully closed when ...