Kia Stinger: Seat Electrical / Seat Ventilation Unit

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Seat Electrical / Seat Ventilation Unit

Components and components location
Component Location

1. Seat ventilation blower
2. Seat ventilation unit (Assist seat only)

Schematic diagrams
Circuit Diagram

Repair procedures
Removal

Seat Ventilation Unit

1.

Disconnect the negative (-) battery terminal.

2.

Remove the front seat assembly [RH].

(Refer to Body - "Front Seat Assembly")

3.

Disconnect the seat ventilation unit connectors (A).

4.

Remove the seat ventilation unit (A) after loosening the mounting screws.

Seat Ventilation Blower

1.

Disconnect the negative (-) battery terminal.

2.

Remove the front seat assembly [LH/RH].

(Refer to Body - "Front Seat Assembly")

3.

Disconnect the seat ventilation blower connector (A).

4.

Remove the seat ventilation blower ducts (A).

5.

Remove the seat ventilation blower (B) after removing the mounting packing (A).

Installation

Seat Ventilation Unit

1.

Install the seat ventilation unit after connecting the connector.

2.

Install the front seat assembly [RH].

3.

Connect the negative (-) battery terminal.

Seat Ventilation Blower

1.

Install the seat ventilation blower.

2.

Install the seat ventilation blower ducts.

3.

Connect the seat ventilation blower connector.

4.

Install the front seat assembly [LH/RH].

5.

Connect the negative (-) battery terminal.

Seat Heater Switch
Components and components location Components Front Seat Switch 1. Driver side seat heater switch 2. Passenger side seat heater switch ...

Lumbar Support Unit
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front seat back cover. (Refer to Body - "Front Seat ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Dynamic Bending Light (DBL)


Dynamic Bending Light (DBL) uses the steering angle and vehicle speed, to keep your field of vision wide by swiveling and leveling the headlamp. Change the switch to the AUTO position when the engine is running. The dynamic Bending Light (DBL) will operate when the headlamp is ON. To turn off ...

Kia Stinger CK 2018-2024 Service Manual: Rear Door Inside Handle


Repair procedures Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. Rremove the rear door inside handle (A) after loosening mounting screws. 3. Install in the reverse ...

Copyright © www.kstinger.com 2015-2024