Kia Stinger: Automatic Transmission Control System / Shift Lever

Kia Stinger CK 2018-2024 Service Manual / Automatic Transmission System / Automatic Transmission Control System / Shift Lever

Components and components location

Components

1. Manual control lever
2. Shift cable

3. Shift lever assembly
4. Knob

Repair procedures

Removal

1.	Shift the gear to "N".

2.	Remove the knob (A) by pulling it in the direction of arrow after removing the boots from the console upper cover.

3.	Remove the floor console assembly. (Refer to Body - “Floor Console Assembly”)

4.	Disconnect the shift lever main connector.

Remove the shift lever (A) after loosening the mounting bolts.

Tightening torque :

8.8 - 13.7 N·m (0.9 - 1.4 kgf·m, 6.5 - 10.1 lb·ft)

6.	Remove the snap pin (A) and shift cable fixing clip (B).

Remove the shift cable from the shift lever after loosening the screws (A).

Tightening torque :

0.69 - 1.37 N·m (0.07 - 0.14 kgf·m, 0.51 - 1.01 lb·ft, 6.08 - 12.15 lb·in)

Installation

1.	Install in the reverse order of removal.

Inhibitor Switch

Specifications Specifications Item Specification Output type PWM Power supply (V) 5 Comp ...

Shift Cable

Components and components location Components 1. Manual control lever 2. Shift cable 3. Shift lever assembly 4. Knob Repair procedures R ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: RCCW (Rear Cross-Traffic Collision Warning)

When your vehicle moves backwards from a parking position, the sensor detects approaching vehicles to the left or right side direction and gives information to the driver. Operating conditions Select RCCW (Rear Cross-Traffic Collision Warning) in “User Settings” under “Driver Ass ...

Kia Stinger CK 2018-2024 Service Manual: Indicators And Gauges

Components and components location Components Standard Type ("3.5" inch) Super Vision Type ("7" inch) Connector Pin Information No. Description No. Description ...