Kia Stinger: Smart Key System / Smart Key Diagnostic

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Smart Key System / Smart Key Diagnostic

Repair procedures

Inspection

In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS).

The diagnostic system (KDS) provides the following information.

(1)	Self diagnosis : Checking failure and code number (DTC).

(2)	Current data : Checking the system input/output data state.

(3)	Actuation test : Checking the system operation condition.

(4)	Additional function : Controlling other features including system option setting and zero point adjustment

2.	Select the "Car model" and the 'IBU-SMK' to be checked in order to check the vehicle with the tester.

3.	Select the 'Current Data' menu to search the current state of the input/output data.

4.	If you want to check each module operation forcefully, select "Actuation test".

Antenna Actuation Diagnosis

1.	Connect the cable of KDS to the data link connector in driver side crash pad lower panel.

2.	After IG ON, select the "Actation Test".

3.	Set the smart key near the related antenna and operate it with a KDS.

4.	If the LED of smart key is blinking, the smart key is normal.

5.	If the LED of smart key is not blinking, check the voltage of smart key battery.

Antenna actuation

–	Interior Antenna 1

–	Interior Antenna 2

–	Tailgate Antenna

–	Bumper Antenna

–	Driver Door Antenna

–	Assist Door Antenna

Antenna Status Check

1.	Connect the cable of KDS to the data link connector in driver side crash pad lower panel.

2.	Select the "Antenna Status Check".

3.	After IG ON, select the "Antenna Status Check".

4.	Set the smart key near the related antenna and operate it with a KDS.

5.	If the smart key runs normal , the related antenna, smart key(transmission, reception) and exterior receiver are normal.

Antenna status

–	Interior Antenna 1

–	Interior Antenna 2

–	Tailgate Antenna

–	Bumper Antenna

–	Driver Door Antenna

–	Assist Door Antenna

FOB Status Check

1.	Connect the cable of KDS to the data link connector in driver side crash pad lower panel.

2.	After IG ON, select the "FOB KEY STATUS INFO".

Smart Key Status Check

1.	Connect the cable of KDS to the data link connector in driver side crash pad lower panel.

2.	After IG ON, select the "SMK STATUS INFO".

Neutralization Status Check

1.	Connect the cable of KDS to the data link connector in driver side crash pad lower panel.

2.	After IG ON, select the "Neutralization mode".

Smart Key Unit

Components and components location Components Connector Pin Information No. Connector A Connector B Connector C 1 ...

Windshield Wiper/Washer

Components and components location Component Location 1. Windshield wiper arm & blade 2. Wiper & washer switch 3. Windshield washer hose & nozzle ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Wide Sunroof Deflector

Repair procedures Replacement 1. Completely open the moving glass using the wide sunroof switch. 2. Remove the wide sunroof deflector (A) after loosening the mounting screws located on the front. & ...

Kia Stinger CK 2018-2024 Owners Manual: Operating door locks from outside the vehicle

After removing the cover (2) while pressing the hole (1) using mechanical key or screw driver (-), turn the key (3) toward the front of the vehicle to unlock and toward the rear of the vehicle to lock. If you lock/unlock the driver’s door with a key, only the driver’s door will l ...