Kia Stinger: Starting System / Starter Relay

Kia Stinger CK 2018-2024 Service Manual / Engine Electrical System / Starting System / Starter Relay

Repair procedures

Inspection

1.	Turn ignition switch OFF and disconnect the battery negative (-) terminal.

2.	Remove the fuse box cover (A).

3.	Remove the starter relay (A).

Check for continuity between the terminals (30 and 87) using an ohmmeter.

Terminal	Resistance	Measure
30 - 87	1MΩ or higher	If there is continuity between the terminals, replace the relay.

Apply 12V to the terminal 85 and ground to the terminal 86 and then check for continuity between the terminals (30 and 87).

Terminal	Resistance	Measure
30 - 87	1Ω or less	If there is no continuity between the terminals, replace the relay.

6.	Install the starter relay.

7.	Install the fuse box coveCalibration beam

Starter

Specifications Specification Item Specification Rated voltage 12 V, 1.2 kW The number of pinion teeth ...

Ignition System

Description and operation Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operat ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Certification label

The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Vehicle Weight Rating). The GVWR includes the weight of the vehicle, all occupants, fuel and cargo. This ...

Kia Stinger CK 2018-2024 Owners Manual: Air cleaner

Filter replacement ■ THETA II 2.0L T-GDI Engine (Gasoline) ■ Lambda II PE 3.3L T-GDI Engine (Gasoline) (Passenger side) The air filter must be replaced when necessary, and should not be washed. Have the air cleaner filter inspected or replaced by an authorized Kia dealer. ■ Lambda I ...