Kia Stinger: Light bulb position (Side) / Stop and tail lamp (LED type) bulb replacement

If the stop and tail lamp (LED) (1, 2) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an integrated unit. The LED lamps have to be replaced with the unit.
A skilled technician should check or repair the stop and tail lamp (LED), for
it may damage related parts of the vehicle.
■ Head lamp - Type A
1. Remove the service cover clip on the wheel housing.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connecto ...
If the rear side marker (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an inte ...
Other information:
Specifications
Specification
▷AGM80L - DIN
Item
Specification
Capacity [20 hr / 5 hr] (AH)
80 / 64
Cold Cranking Amperage (A)
800 (SAE) / 800 (EN)
Reserve Capacity (Min)
...
Launch Control Operation
When using Launch Control, a driver should always make sure that the engine’s
cooling water is warmed up and reaches a recommended temperature.
To operate ESC Off state 2, Press and hold ESC button for more than 3 seconds
in Sports mode. (Status Display on Clus ...