Kia Stinger: Fuel Delivery System / Sub Fuel Sender

Kia Stinger CK 2018-2025 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Sub Fuel Sender

Repair procedures

Removal

1.	Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel Line")

2.	Switch "OFF" the ignition and disconnect the negative (-) battery terminal.

3.	Remove the rear seat cushion. (Refer to Body - "Rear Seat Assembly")

4.	Remove the sub fuel sender service cover (A) after loosening the mounting screws.

5.	Disconnect the sub fuel sender connector (A).

6.	Remove the locking ring (B) by using the special service tool (A) [No.: 09310-B8100].

7.	Remove the sub fuel sender (A).

Installation

1.	Install in the reverse order of removal.

Fuel Pump Motor

Specifications Specifications Fuel pump motor Item Specification Output Voltage (V) 12.6 Low Pressur ...

Fuel Sender Assembly

Repair procedures Removal Main fuel sender cannot be replaced on its own; it should be replaced with the fuel pu ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Hood Seal Weatherstrip

Repair procedures Replacement 1. Detach the clip and then remove the hood seal weatherstrip (A). Be careful not to scratch the hood seal weatherstrip. ...

Kia Stinger CK 2018-2025 Owners Manual: Tire replacement

If the tire is worn evenly, a tread wear Indicator (A) will appear as a solid band across the tread. This shows there is less than 1.6 mm (1/16 inch) of tread left on the tire. Replace the tire when this happens. Do not wait for the band to appear across the entire tread before replacing the ...