Kia Stinger: Driver Attention Warning (DAW) / System malfunction

Kia Stinger CK 2018-2024 Owners Manual / Driving your vehicle / Driver Attention Warning (DAW) / System malfunction

When the “Check System” warning message appears, the system is not working properly. In this case, have the vehicle inspected by an authorized Kia dealer.

WARNING

✽ NOTICE

The Driver Attention Warning system utilizes the camera sensor on the front windshield for its operation. To keep the camera sensor in the best condition, you should observe the followings:

- Do not disassemble camera temporarily for tinted window or attaching any types of coatings and accessories. If you disassemble a camera and assemble it again, take your vehicle to an authorized Kia dealer and have the system checked to need a calibration.
- Do not locate any reflective objects (i.e. white paper, mirror) over the dashboard. Any light reflection may prevent the Driver Attention Warning (DAW) system from functioning.
- Pay extreme caution to keep the camera sensor out of water.
- Do not disassemble the camera assembly or apply any impact on the camera assembly.
• Playing the vehicle audio system at high volume may offset the Driver Attention Warning system warning sounds

✽ NOTICE

The Driver Attention Warning system may not provide alerts in the following situations:

✽ NOTICE

The Driver Attention Warning (DAW) system does not detect actual driver fatigue or drowsiness. The system monitors driving and provides a warning if it detects inattentive driving practices.

Resetting the system, System disabled
Resetting the system The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning system. The dri ...

Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you drive and when you drive. Each of these factors affects how many kilometers (miles) you can get from a liter (gallon) ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Ambient Temperature Sensor


Description and operation Description Located in front of the condenser, the ambient temperature sensor detects the ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output ...

Kia Stinger CK 2018-2024 Service Manual: External AMP


Components and components location Components [Mobis] Connector Pin Information No. Connector A Connector B 1 Battery (+) Rear door left speaker (+) 2 Battery ...

Copyright © www.kstinger.com 2015-2024