Kia Stinger: Tail Gate / Tail Gate Back Panel

Kia Stinger CK 2018-2024 Service Manual / Front Seat Belt / Tail Gate / Tail Gate Back Panel

Repair procedures
Replacement
  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Remove the tailgate trim.

(Refer to tailgate - "tailgate Trim")

2.

Disconnect the rear combination lamp connector [inside] (A).

3.

Remove the rear combination lamp [inside] (A) after loosening the mounting nuts.

4.

Remove the tailgate back panel (A) by using a remover.

5.

Install in the reverse order of removal.

  

Make sure that the connector is connected properly.

Replace any damage clips.

Tail Gate Lift
Repair procedures Replacement    Do not apply sealant to the body. 1. Using a screwdriver, re ...

Tail Gate Weatherstrip
Repair procedures Replacement    Do not apply sealant to the body. 1. Remove the tailgate wea ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Electric Waste Gate Actuator (EWGA)


Description and operation Desrcription Installed on the turbocharger, the Electric Waste Gate Actuator (EWGA) operates the vane in the Waste Gate Turbocharger (WGT) and regulates the compressed air amount based on the PWM signal from the ECM. This actuator consists of a DC motor wh ...

Kia Stinger CK 2018-2024 Owners Manual: ISG (Idle Stop and Go) system


Your vehicle may be equipped with the ISG system, which reduces fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill. (For example : red light, stop sign and traffic jam) The engine starts automatically as soon as the starting conditions are met. The ...

Copyright © www.kstinger.com 2015-2024