Kia Stinger: Tail Gate / Tail Gate Trim
Components and components location
1. Tailgate trim
2. Tailgate side trim [LH]
|
3. Tailgate upper trim
4. Tailgate side trim [RH]
|
Repair procedures
Wear gloves to protect hands from injury.
|
• |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
• |
Take care not to bend or scratch the trim and panels.
|
|
1. |
Wear gloves to protect hands from injury.
|
2. |
Remove the tailgate side trim (A) after loosening the mounting screw.
|
3. |
Remove the tailgate inside full handle cap (A) by using a remover.
|
4. |
Separate the smart tailgate inner switch (A).
|
5. |
Remove the smart tailgate inner switch after disconnecting the connector
(A).
|
6. |
Remove the tailgate trim (A) after loosening the mounting screws.
|
7. |
Install in the reverse order of removal.
Replace any damaged clips.
|
|
Components and components location
Components Location
1. Tailgate assembly
Repair procedures
Replacement
&nb ...
Components and components location
Component Location
1. Tailgate latch assembly
Repair procedures
Replacement
...
Other information:
Components and components location
Components
1. Rear door trim panel
2. Rear door module
3. Rear door panel
4. Rear door fixed glass & weatherstrip
5. Rear door drive channel
6. Rear door side weatherstrip
7. Rear door body side weatherstrip
...
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remov ...