Kia Stinger: Lighting System / Vanity Lamp

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Lighting System / Vanity Lamp

Repair procedures
Removal
1.

Disconnect the negative (-) battery terminal.

2.

Remove the vanity lamp (A) using a flat-tip screwdriver.

3.

Disconnect the vanity lamp connector (A).

Installation
1.

Connect the vanity lamp connector.

2.

Install the vanity lamp.

3.

Connect the negative (-) battery terminal.

Luggage Room Lamp
Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, separate the luggage room lamp (A). ...

Overhead Console Lamp
Repair procedures Inspection 1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace t ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Suspension System


Special service tools Special Service Tools Tool Name / Number Illustration Description Engine support fixture (bar) 09200-3N000 Used for holding engine assembly when removing / installing transaxle ...

Kia Stinger CK 2018-2024 Service Manual: Seat Belt Pretensioner (BPT)


Description and operation Description The Seat Belt Pretensioners (BPT) are installed inside the Center Pillars (LH & RH). When a vehicle crashes at a certain degree of frontal impact, the seat belt pretensioners help reduce the severity of injury to the front seat occupants by ...

Copyright © www.kstinger.com 2015-2024