Kia Stinger: Brake system / Warning messages
When the EPB is applied from Auto Hold, a warning will sound and a message will appear.
When the conversion from Auto Hold to EPB is not working properly a warning will sound and a message will appear.
✽ NOTICE
When this message is displayed, the Auto Hold and EPB may not operate. For your safety, depress the brake pedal.
If you do not apply the brake pedal when you release the Auto Hold by pressing the [AUTO HOLD] switch, a warning will sound and a message will appear.
When you press the [AUTO HOLD] switch, if the driver's door and engine hood are not closed or the driver's seat belt is unfastened, a warning will sound and a message will appear on the LCD display. At this moment, press the [AUTO HOLD] button after closing the driver's door and engine hood and fastening the seat belt.
AUTO HOLD
The Auto Hold maintains the vehicle in a standstill even though the brake pedal
is not depressed after the driver brings the vehicle to a complete stop by depressing
the brake pedal.
1.Depress ...
Anti-lock brake system (ABS)
ABS (or ESC) will not prevent accidents due to improper or dangerous driving
maneuvers. Even though vehicle control is improved during emergency braking, always
maintain a safe distance between yo ...
Other information:
Kia Stinger CK 2018-2024 Service Manual: Evaporator Core
Repair procedures Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater unit. (Refer to Heater - "Heater Unit") 3. Remove the heater unit lower case (A) after loosening the screws. ...
Kia Stinger CK 2018-2024 Service Manual: Around View Monitor (AVM)
Components and components location Components 1) AVM unit basically transmits data via C-CAN only. • Steering wheel angle sensor : C-CAN • ...
