Kia Stinger: Wireless Power Charger (WPC) System / Wireless Power Charging (WPC) Lamp

Kia Stinger CK 2018-2024 Service Manual / Windshield Wiper/Washer / Wireless Power Charger (WPC) System / Wireless Power Charging (WPC) Lamp

Components and positions

Components

Repair procedures

Removal

•	Handling wireless charging system parts by wet hands may cause electric shock.

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Disconnect the negative (-) battery terminal.

2.	Remove the console complete assembly. (Refer to Body - "Floor Console Assembly")

3.	Remove the front cover (A) after loosening the mounting screws.

4.	Remove the floor console tray (A) by using a remover.

5.	Disconnect the wireless power charging lamp connector (A).

6.	Remove the wireless power charging lamp (A) by pressing the fixing hooks.

Installation

1.	Install the wireless power charging lamp.

2.	Connect the wireless power charging lamp connector.

3.	Install the floor console tray.

4.	Install the front cover.

5.	Install the console complete assembly.

6.	Connect the negative (-) battery terminal.

Wireless Power Charging (WPC) Unit

Components and positions Components Circuit diagram Circuit Diagram Repair procedures Removal ...

Heating, Ventilation And Air Conditioning

Special service tools Special Service Tools Tool (Number and name) Illustration Use 09977-3R000 Disc & hub assembly bolt re ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Receiver-Drier

Repair procedures Replacement 1. Remove the condenser. 2. Remove the cap (B) from the bottom of the condenser using an L wrench (A). Tightening torque : 9.8 - 14.7 N·m (1.0 - 1.5 kgf·m, 7.2 - 10.8 lb·ft) ...

Kia Stinger CK 2018-2024 Owners Manual: AUTO HOLD

The Auto Hold maintains the vehicle in a standstill even though the brake pedal is not depressed after the driver brings the vehicle to a complete stop by depressing the brake pedal. 1.Depress the brake pedal, start the engine and then press the Auto Hold button. The white AUTO HOLD indicat ...