Kia Stinger: 4 Wheel Drive (AWD) System / Specifications

Kia Stinger CK 2018-2025 Service Manual / 4 Wheel Drive (AWD) System / Specifications

Service data
Service Data

Item
Specification
Product name
Transfer case
Operation method
Electronic actuator control method (DC motor)
Torque capacity
1,000 Nm
Weight
24.8 kg (Oil injection state)

Tightening torque
Tightening Torques

Item
 N·m
Kgf·m
lb·ft
Bolt for fixing the transfer case
29.4 - 41.2
3.0 - 4.2
21.7 - 30.4
Bolt for fixing the front propeller shaft
49.0 - 68.6
5.0 - 7.0
36.2 - 50.6

Lubricant
Lubricant

Item
Defined lubricant
Capacity
Transfer oil
Exclusive oil for transfer case
ATF SHELL TF0870B
0.820L
(0.217 U.S gal., 0.87 U.S.qt., 0.72 Imp.qt.)

4 Wheel Drive (AWD) System
Special service tools Special Service Tools Tool Name / Number Illustration Description Oil seal installer (Main Shaft) 0K473-J ...

Transfer Assembly
...

Other information:

Kia Stinger CK 2018-2025 Owners Manual: Engine oil


Checking the engine oil level ■ THETA II 2.0L T-GDI Engine (Gasoline) ■ Lambda II PE 3.3L T-GDI Engine (Gasoline) 1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 ...

Kia Stinger CK 2018-2025 Owners Manual: Back-up lamp bulb replacement


1. Open the liftgate. 2. Remove the service cover of both side (drive side and passenger side). 3. Remove the nuts from rear combination lamp of both side (drive side and passenger side). 4. Disconnect the connector from rear combination lamp of both side (drive side and passenger side) ...

Copyright © www.kstinger.com 2015-2025