Contents:

1. Door lock
2. Door unlock
3. Liftgate open
4. Panic alarm
With smart key, you can lock or unlock doors (and liftgate) and start the engine without inserting the key. Refer to the following, for more details.

Pressing the button of the front outside door handles with all doors closed and any door unlocked, locks all the doors. The hazard warning lights will blink and the chime will sound once to indicate that all doors are locked. The button will only operate when the smart key is within 0.7 ~ 1 m (28 ~ 40 in.) from the outside door handle. If you want to make sure that a door has locked or not, you should check the door lock button inside the vehicle or pull the outside door handle.
In some instances, when the outside door button is selected, the doors will not lock and an audible chime will sound for 3 seconds if any of the following occurs:
Pressing the button of the driver's (or front passenger’s) outside door handle with all doors closed and locked, unlocks the driver's door.
The hazard warning lights will blink twice to indicate that the driver's door is unlocked. Also, the outside rearview mirrors will automatically unfold if the outside rearview mirror folding switch is in the AUTO position.
The button will only operate when the smart key is within 0.7 ~ 1 m (28 ~ 40 in.) from the outside door handle.
When Two press unlock function is activated,
- If you press the driver's outside door handle button, the driver`s door will
unlock.
- If you press the driver's outside door handle button within four seconds again,
then all the doors will unlock.
✽ NOTICE
You can activate or deactivate the Two Press Unlock function. Refer to “User settings” in this chapter.
If you are within 0.7 ~ 1 m (28 ~ 40 in.) from the outside liftgate handle, with your smart key in possession, the lift gate will unlock and open when you press the liftgate handle switch.
The hazard warning lights will blink twice to indicate that the liftgate is unlocked.
Also, once the liftgate is opened and then closed, the liftgate will lock automatically.
Kia Stinger (CK) 2018-2023 Owner's Manual: Inhibitor Switch
Specifications Specifications Item Specification Output type PWM Power supply (V) 5 Components and components location Components Location 1. Inhibitor switch 2. Manual control lever Schematic diagrams Circuit Diagram Repair procedures Inspection Inspect the connector thoroughly for looseness, poor connection, bending, corrosion, contamination, deformation, or damage.Kia Stinger (CK) 2018-2023 Owner's Manual: Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts (retractor pretensioner and EFD (Emergency Fastening Device)). The pre-tensioner seat belts may be activated, when a frontal collision is severe enough, together with the air bags. When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor may lock into position.