Kia Stinger CK: Features of your vehicle / LCD windows

Contents:

Over view

■ Type A

■ Type B

LCD windows show the following information to drivers.

- Trip information
- LCD modes
- Warning messages

Trip information (Trip computer) ➤

LCD Modes ➤

Distance to empty

■ Type A

■ Type B

• The distance to empty is the estimated distance the vehicle can be driven with the remaining fuel.

- Distance range : 1 ~ 9,999 km (1 ~ 9,999 mi.)

• If the estimated distance is below 1 km (1 mi.), the trip computer will display “---” as distance to empty.

✽ NOTICE

  • If the vehicle is not on level ground or the battery power has been interrupted, the distance to empty function may not operate correctly.
  • The distance to empty may differ from the actual driving distance as it is an estimate of the available driving distance.
  • The trip computer may not register additional fuel if less than 6 liters (1.6 gallons) of fuel are added to the vehicle.
  • The fuel economy and distance to empty may vary significantly based on driving conditions, driving habits, and condition of the vehicle.

User Settings Mode ➤

Warning Messages ➤

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Parking Brake Assembly

Repair procedures Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the knee airbag. (Refer to Restraint - "Knee airbag (KAB) module") 4.

Kia Stinger (CK) 2018-2023 Owner's Manual: Seat Belt Buckle Switch (BS)

Description and operation Description The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return.

Categories

 
Copyright © 2025 www.kstinger.com 0.0083