Kia Stinger CK: Driving your vehicle / Engine start/stop button

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / Engine start/stop button

Contents:

Illuminated engine start/stop button

Whenever the front door is opened, the engine start/stop button will illuminate for your convenience. The light will go off after about 30 seconds when the door is closed.

When all doors are closed and you lock the vehicle by using the transmitter or the smart key, the light will go off immediately.

Engine start/stop button position ➤

Starting the engine with a smart key ➤

Before driving

Engine start/stop button position

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Engine Oil and Filter

Repair procedures Inspection [Theta-II 2.0 T-GDI / Lambda-II 3.3 T-GDI] Engine Oil Level Be sure that the vehicle is on level ground. 1. Warm up and stop the engine, and then wait for 5 minutes. 2. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil to return to the oil pan.

Kia Stinger (CK) 2018-2023 Owner's Manual: Drive Belt Tensioner

Repair procedures Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 2. Remove the drive belt auto tensioner pulley (A). Tightening torque : 53.9 - 63.7 N·m (5.5 - 6.5 kg·m, 39.8 - 47.0 lb·ft) Tensioner pulley bolt is left-hands screw.