✽ NOTICE
This system can only sense objects within the range and location of the sensors; It can not detect objects in other areas where sensors are not installed. Also, small or slim objects, such as poles or objects located between sensors may not be detected by the sensors.
Always visually check behind the vehicle when backing up.
Be sure to inform any drivers of the vehicle that may be unfamiliar with the system regarding the systems capabilities and limitations.
WARNING
Pay close attention when the vehicle is driven close to objects on the road, particularly pedestrians, and especially children. Be aware that some objects may not be detected by the sensors, due to the object’s distance, size or material, all of which can limit the effectiveness of the sensor. Always perform a visual inspection to make sure the vehicle is clear of all obstructions before moving the vehicle in any direction.
Self-diagnosis
If you don’t hear an audible warning sound or if the buzzer sounds intermittently when shifting the gear to the R (Reverse) position, this may indicate a malfunction in the parking distance warning-reverse. If this occurs, have your vehicle checked by an authorized Kia dealer as soon as possible.
✽ NOTICE
Your new vehicle warranty does not cover any accidents or damage to the vehicle or injuries to its occupants due to a parking distance warning-reverse malfunction. Always drive safely and cautiously.
Kia Stinger (CK) 2018-2023 Owner's Manual: LCD Modes
(1) SPORT mode (if equipped) This mode displays Gauge, Lap Timer, G-Force. (2) Trip Computer mode This mode displays driving information such as the tripmeter, fuel economy, and so on. ❈ For more details, refer to “Trip Computer” in this chapter. (3) Turn by Turn mode (if equipped) This mode displays the state of the navigation. (4) LKA/SCC mode (if equipped) This mode displays the state of the Smart Cruise Control (SCC) and Lane keeping Assist (LKA).Kia Stinger (CK) 2018-2023 Owner's Manual: Check tire pressure
You can check the tire pressure in the information mode on the cluster. - Refer to “User settings mode” in chapter 4. Tire pressure is displayed 1~2 minutes later after driving. If tire pressure is not displayed when the vehicle is stopped, “Drive to display” message displays. After driving, check the tire pressure. You can change the tire pressure unit in the user settings mode on the cluster.