Kia Stinger CK: 4 Wheel Drive (AWD) System / Specifications
Kia Stinger (CK) 2018-2023 Service Manual / 4 Wheel Drive (AWD) System / Specifications
Service data
| Service Data |
|
Item |
Specification |
|
Product name |
Transfer case |
|
Operation method |
Electronic actuator control method (DC motor) |
|
Torque capacity |
1,000 Nm |
|
Weight |
24.8 kg (Oil injection state) |
Tightening torque
| Tightening Torques |
|
Item |
N·m
|
Kgf·m |
lb·ft |
|
Bolt for fixing the transfer case |
29.4 - 41.2 |
3.0 - 4.2 |
21.7 - 30.4 |
|
Bolt for fixing the front propeller shaft |
49.0 - 68.6 |
5.0 - 7.0 |
36.2 - 50.6 |
Lubricant
| Lubricant |
|
Item |
Defined lubricant |
Capacity |
|
Transfer oil |
Exclusive oil for transfer case ATF SHELL TF0870B |
0.820L (0.217 U.S gal., 0.87 U.S.qt., 0.72 Imp.qt.) |
Other information:
Kia Stinger (CK) 2018-2023 Service Manual: Blower Motor
Repair procedures Inspection 1. Connect the battery voltage and check for blower motor operation. 2. If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation. 3. Replace the blower motor if it is proved that there is a problem with it.Kia Stinger (CK) 2018-2023 Service Manual: Active hood sensor & unit assembly
Repair procedures Replacement 1. Disconnect the negative battery terminal. After disconnecting the cables, wait at least 30 seconds. 2. Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly") 3.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Copyright © 2026 www.kstinger.com 0.0092