Kia Stinger CK: Cruise control system / To set cruise control speed
Kia Stinger (CK) 2018-2025 Owner's Manual / Driving your vehicle / Cruise control system / To set cruise control speed
1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
3. Move the lever down (to SET-), and release it at the desired speed.The cruise indicator and set speed on the LCD screen will illuminate. Release the accelerator at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down slightly when driving uphill or speed up slightly while going downhill.
Other information:
Kia Stinger (CK) 2018-2025 Owner's Manual: Warning message
The message will appear to notify the driver if there are foreign substances on the surface or inside the rear bumper or it is hot near the rear bumper. The light on the switch and the system will be turned off automatically. Remove the foreign substance on the rear bumper. After the foreign substance is removed, if you drive for approximately 10 minutes, the system will work normally.Kia Stinger (CK) 2018-2025 Owner's Manual: Driving in the rain
Rain and wet roads can make driving dangerous, especially if you’re not prepared for the slick pavement. Here are a few things to consider when driving in the rain: A heavy rainfall will make it harder to see and will increase the distance needed to stop your vehicle, so slow down. Keep your windshield wiping equipment in good shape. Replace your windshield wiper blades when they show signs of streaking or missing areas on the windshield.Categories
{BRIEF}
Copyright © 2025