Kia Stinger: Interior lights / Map lamp
■ Type A
■ Type B
• Press the lens (1) to turn ON the map lamp.
To turn the map lamp OFF press the lens (1) again.
• (2) 
: DOOR mode
- The map lamp and room lamp come on when a door is opened. The lamps go out
after approximately 30 seconds.
- The map lamp and room lamp come on for approximately 30 seconds when doors are
unlocked with a transmitter or smart key as long as the doors are not opened.
- The map lamp and room lamp will stay on for approximately 20 minutes if a door
is opened with the ignition switch in the ACC or LOCK/OFF position.
- The map lamp and room lamp will stay on continuously if the door is opened with
the ignition switch in the ON position.
- The map lamp and room lamp will go out immediately if the ignition switch is changed
to the ON position or all doors are locked.
- To turn off the DOOR mode, press the DOOR button (2) once again (not pressed).
✽ NOTICE
The DOOR mode and ROOM mode can not be selected at the same time.
Front Room Lamp:
• Type A
(3): Press this switch to turn the
front and rear room lamps on and off.
• Type B
(3): Press this switch to turn the
front and rear room lamps on.
(4): Press this switch to turn the
front and rear room lamps off.
Automatic turn off function
The interior lights automatically turn off approximately 20 minutes after the
ignition switch is turned off, if the lights are in the ON position.
If your vehicle is equipped with the theft alarm s ...
Liftgate room lamp
The liftgate room lamp comes on when the liftgate is opened.
The liftgate room lamp comes on as long as the liftgate lid opens. To prevent
unnecessary battery drain, close the liftgate lid secure ...
Other information:
Kia Stinger CK 2018-2023 Service Manual: Specifications
Service data Service Data Purge Control Solenoid Valve (PCSV) ▷ Specification Item Specification Coil Resistance (Ω) 18.5 - 22.5 [20°C(68°F)] Tightening torque Tightening Torques ...
Kia Stinger CK 2018-2023 Owners Manual: To set cruise control speed
1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph). 3. Move the lever down (to SET-), and release it at the desired speed.Th ...
