Kia Stinger: Body Side Molding / Pillar Garnish

Kia Stinger CK 2018-2025 Service Manual / Body (Interior and Exterior) / Body Side Molding / Pillar Garnish

Repair procedures
Replacement
  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Remove the C pillar molding (A) by using a remover.

2.

Install in the reverse order of removal.

  

Replace any damaged clips.

Rear Spoiler
Repair procedures Replacement    Put on gloves to protect your hands.    ...

Side Sill Molding
Repair procedures Replacement    Put on gloves to protect your hands.  &nbs ...

Other information:

Kia Stinger CK 2018-2025 Owners Manual: Transmitter precautions


The smart key will not work if any of following occurs: You exceed the operating distance limit (about 10 m [32.8 feet]). The battery in the smart key is weak. Other vehicles or objects may be blocking the signal. The weather is extremely cold. The smart key is close to a radio transmitt ...

Kia Stinger CK 2018-2025 Service Manual: Low Pressure Fuel Pump


Repair procedures Inspection [Fuel sender] 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Remove the fuel pump assembly. 3. Using an ohmmeter, measure the resistance between term ...

Copyright © www.kstinger.com 2015-2025