Kia Stinger: Theft-alarm system / Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is
armed.
- A front or rear door is opened without using the smart key.
- The liftgate is opened without using the smart key.
- The engine hood is opened.
The horn will sound and the hazard warning lights will blink continuously for
approximately 30 seconds, and repeat the horn 2 times unless the system is disarmed.
To turn off the system, unlock the doors with the smart key.
Park the vehicle and stop the engine. Arm the system as described below.
1. Turn off the engine.
2. Make sure that all doors (and liftgate) and engine hood are closed and latched.
3. Lock the doors ...
The system will be disarmed when
• The doors (and liftgate) are unlocked with the smart key.
After depressing the unlock button, the hazard warning lights will blink and
the chime will sound twi ...
Other information:
Components and components location
Components
Repair procedures
Removal
When replacing the LKA switch, check that the symbol mark in the cluster
operates normally by pressing the ON/OFF switch. ...
You can check the tire pressure in the information mode on the cluster.
- Refer to “User settings mode” in chapter 4.
Tire pressure is displayed 1~2 minutes later after driving.
If tire pressure is not displayed when the vehicle is stopped, “Drive to
display” message displays. Af ...