Kia Stinger: Fuel filler lid / Opening the fuel filler lid
The fuel filler lid must be opened from inside the vehicle by pressing the fuel
filler lid opener button.
If the fuel filler lid does not open because ice has formed around it, tap lightly
or push on the lid to break the ice and release the lid. Do not pry on the lid.
If necessary, spray around the lid with an approved de-icer fluid (do not use radiator
anti-freeze) or move the vehicle to a warm place and allow the ice to melt.
1. Stop the engine.
2. To open the fuel filler lid, push the fuel filler lid opener button.
3. Pull open the fuel filler lid (1).
4. To remove the cap, turn the fuel filler cap (2) counterclockwise.
5. Refuel as needed.
1. To install the cap, turn it clockwise until it “clicks” once. This indicates
that the cap is securely tightened.
2. Close the fuel filler lid and push it in lightly making sure that it is se ...
Other information:
After removing the cover (2) while pressing the hole (1) using mechanical
key or screw driver (-), turn the key (3) toward the front of the vehicle to
unlock and toward the rear of the vehicle to lock.
If you lock/unlock the driver’s door with a key, only the driver’s door
will l ...
Components and components location
Components
1. Turbo manifold module
2. Turbo manifold module gasket
3. Heat protector
4. Warm-up catalytic converter (WCC) heat protector
5. Oil feed pipe
6. Turbo manifold module stay
7. Oil drain p ...